Product Features
GeneralInfo
Specifications
Protection grade: IP40
Germany technology
autburner running.omatic burner controller can be directly used to start and detec
Technical Parameters
1. Power supply: AC220V plus-minus 10% 50Hz.
2. Ambient temperature: Minus 20 celsius degree to 65 celsius degree without condensation.
3. Flame detection current: Adjustable between 2-20 microamp.
4. Protection grade: IP40.
5. Ignition cable: Less than 5m (temperature resisting high-voltage line).
6. Cable length: For electrode ionized detection mode: Max 75m; For UV detection mode 100m.
Detecting mode: Both ignition and detection functions are combined into one electrode or two of the electrode separated control.
Attentions:
1. The power cord shall be fixed, and live wire L and zero line N shall not be connected error in order to prevent equipment damage.
2. The solenoid valve and ignition transformer shall be driven by AC220V power source, with max. Output currrent 2A and each output current no greater than 2.5A.
3. Combustion indicator contact(terminals 13-14) and ignition failure signal contact (terminals 8-9): Max. Current 2A, max. Voltage: 253V.
4. Max. Working voltage of UV flame detector: 230V, without internal fuse.
5. An independent detection cable is used and in the protection of plastic cable pipe, shall be separated from the main cable in case of remote control, to prevent electromagnetic interference.
6. In case of UV detector, the 7# terminal may not be earthed.
7. Terminals 11 and 12 have been parallel connected inside it.
8. Installation: 35mm U-shaped rail can be used, width 113mm, height 75mm and depth 120mm, distance of two installation holes on the base plate.
9. When a signal electrode is used, the 7# terminal of the burner and controller must be earthed in order to prevent equipment damage.
10. Before power supply, the two fixation screws on the automatic burner controller must be screwed down.
11. The secondary ignition operation shall be done in 20 seconds after the alarm red light is on, to prevent overload damage.
Drawing pictures
WhyDenk ?
1. We are the biggest outlets center in mainland of China for United States HONEYWELL Series, WINTEK Series of industrial electrical automatic control instruments and Italy MADAS / Germany Krom Series of gas equipments.
2. We have a professional R&D team for research and development of new technics and products
3. We are expert in designing and debugging furnace combustion systeme in the line of metallurgical machinery industry
4 .We can provide professinal support on projects
5. We manufacture all products according to ISO9001:2000 quality control systerm guidelines
Authorization
Sampling
Sample Lead Time: 3-7 working days
Sample Free: Available
Production Lead Time: 15-20days after received the deposit
Quality Control
1. IQC (Incoming check )
2. IPQC (Process quallity control )
3. First Piece quality control
4. Mass products quality control
5. OQC (Outgoing quality control)
6. FQC (Final Quality Check)
Burner Nozzle
Certification
MADAS has an internal own laboratory,certified by IMQ since 1995:IMQ uses it directly to certify our products according the test required by the European rules such as UNI EN88-1,UNI EN88-2,UNI EN161,UNI EN126,UNI EN334,UNI EN13611,CE,GOST, TSE, UKRSEPR and GOSPROMNADZOR etc.
Customization
1. Packing material
2. Artwork
3. Shipping mark
4. Carton printing
Payment
1. 30% down payment before production ,70% balance before shipment
2. We can offer different pricing of FOB, CIF and C&F.
3. Currencies of RMB,USD or HKD are both acceptable.
4. For established customers, we will offer more favorable payment terms
5. AliExpress Escrow
6. West Union
7. Bank Transfer
8. L/C is acceptable.
Shipping
1. We can offer FOB guangzhou and shenzhen to our customers
2. We can offer CIF to those in need
* DHL, UPS, Fedex, TNT
* China Post Air Mai,EMS
Installation(Just for you refernce)
Our Successful Case
We are the biggest outlets center in mainland of China for United States HONEYWELL Series, WINTEK Series of industrial electrical automatic control instrumentsand Italy MADAS / Germany Krom Series of gas equipments. We offers high quality, high-performance products for a variety of pipeline gas and oil both in domestic and abroad . Besides ,we can providing professinal support on projects and there are some successful cases for your refernce
About Us
Foshan Delk Energy Technique Co., Ltd. is the biggest outlets center in mainland of China for United States HONEYWELL Series, WINTEK Series of industrial electrical automatic control instruments and ltaly MADAS / Germany Krom Series of gas equipments. With principle of Integrity based, customer first to provide customers with cost-effective products and good services. Our company offers high quality, high-performance products for a variety of pipeline gas and oil to domestic, which are widely used in space technology, metallurgy, ceramics, electro ceramics, chemical engineering and Utilities etc.
Maintaince for burner
It is easy to maintain for burner since it using clean fuel,and we'd better cleaning it regularly to prolong life time and easy to operate. To be sure that to remove the dirty from nozzle carefully.check the ratio for air and fuel regularly
Warning : Make sure that cooling burner first while dismantling it,and pay more attention to the sealing and gasket to avoid damage
Production Flow
Our Services
1. We have a professional control system and all of our products 100% inspections before shipment.
2. If you receive the goods, in the detection or found in the use of products have quality problems, please call our customer service hotline, we promise to handle emergency in 24 hours, give you the best answer.
3. Other special specifications can be customized.
4. Packing material can be customized
Exhibition pictures
Customers Using our products
Packing information
1. Packing material:Carton and polywood etc.
2. Paking size:60*50*40 cm
3. Can be packed as client's requirement
Main Customers country overview
Our products are popular to all over the word , such as USA, Canada, Germany, Sweden, Italy, Greece, Belgium and Spain etc Warmly welcome to contact us at any time if you are interested in our products
FAQ
1. Q: What kind profile of flame about burner ?
A: flat flame, short flame, long flame
2. Q: What is the MOQ? Can I have a trial order?
A: The minimum quantity is 5 units, However,We kindly understand an order intention is outlined with a sample order request
Therefore, we welcome customers to initiate a business opportunity by giving us a sample order.
3. Q: Can I customized the products specification ?
A: Yes,of course ,we can manufacture it as your specification as we can provide OEM and ODM
4. Q:Do you have stocks ?
A: Yes,of course,there are some stocks in our factory,if you want to know more ,please Email to us.
7. Q: What's the delivery time generally ?
A: Normally,it is 15 days to 20 days and it is depend on the quatity
